Rigid nanoscopic containers for highly dispersed, stable metal and bimetal nanoparticles with both size and site control

We demonstrate a novel strategy for the preparation of mesoporous silica-supported, highly dispersed, stable metal and bimetal nanoparticles with both size and site control. The supporting mesoporous silica, functionalized by polyaminoamine (PAMAM) dendrimers, is prepared by repeated Michael addition with methyl acrylates (MA) and amidation reaction with ethylenediamine (EDA), by using aminopropyl-functionalized mesoporous silica as the starting material. The encapsulation of metal nanoparticles within the dendrimer-propagated mesoporous silica is achieved by the chemical reduction of metal-salt-impregnated dendrimer-mesoporous silica by using aqueous hydrazine. The site control of the metal or bimetal nanoparticles is accomplished by the localization of inter- or intradendrimeric nanoparticles within the mesoporous silica tunnels. The size of the encapsulated nanoparticles is controlled by their confinement to the nanocavity of the dendrimer and the mesopore. For Cu and Pd, particles locate at the lining of mesoporous tunnels, and have diameters of less than 2.0 nm. For Pd/Pt, particles locate at the middle of mesoporous tunnels and have diameters in the range of 2.0-4.2 nm. The Pd and Pd/Pt nanoparticles are very stable in air, whereas the Cu nanoparticles are stable only in an inert atmosphere.     

C-O-bond cleavage of esters with a naphthyl group in the higher triplet excited state during two-color two-laser flash photolysis

A C-O-bond cleavage of esters having a naphthyl group, NpCO-OR and RCO-ONp (Np=alpha- and beta-naphthyl ((alpha)Np and (beta)Np, respectively), R=Ph and Me), was found during the two-color two-laser flash photolysis in acetonitrile. The C-O-bond cleavage occurred when NpCO-OR and RCO-ONp were excited to the singlet excited states (S1). On the other hand, no reaction occurred from the lowest triplet excited states (T1). When NpCO-OR(T1) and RCO-ONp(T1) were excited to the higher triplet excited states (Tn) using the second laser during the two-color two-laser flash photolysis, the C-O-bond cleavage occurred. The C-O-bond cleavage quantum yield (Phi) was estimated from the plots of the T1-state esters disappeared within a laser flash versus the second laser intensities. The C-O-bond cleavage in (beta)NpCO-OPh(Tn) occurred more efficiently than in (alpha)NpCO-OPh(Tn) and that in PhCO-O(beta)Np(Tn) occurred more efficiently than in PhCO-O(alpha)Np(Tn). The Phi value for ester with Ph and beta-Np groups was larger than that for ester with Ph and alpha-Np groups. The Phi value for MeCO-O(alpha)Np(Tn) was similar to those for PhCO-ONp(Tn), while that for MeCO-O(beta)Np(Tn) was much smaller than those for PhCO-ONp(Tn) and MeCO-O(alpha)Np(Tn). On the other hand, no C-O-bond cleavage was observed in NpCO-OMe(Tn). The Phi value depended on the characters of the groups (Np, Ph, and Me) on the ester. Whether R is Ph or Me with or without pi electron, respectively, is important for the C-O-bond cleavage. In other words, electronic delocalization of the T(n) state including Np and ester groups is necessary for the occurrence of the C-O-bond cleavage in NpCO-OR(Tn) and RCO-ONp(Tn).     

Coupling a microchip with electrospray ionization quadrupole time-of-flight mass spectrometer for peptide separation and identification

The present study reports a simple method of coupling a glass microchip to an electrospray ionization (ESI) quadrupole time-of-flight mass spectrometer (QTOF-MS) for separation and identification of peptides. A sheath-flow electrospray interface was constructed based on attaching a short fused-silica capillary to the microchip. The dead volume at the interface was effectively reduced by wet etching an approximate flat-bottom capillary insertion channel coaxial to the end of separation microchannel and using a wire-controlled epoxy-blocking attachment method. The makeup liquid and neb gas were coaxially pumped through two stainless-steel tees to maintain a stable and efficient electrospray. The coupled microchip/ESI-QTOF-MS system was successfully used to carry out electrophoresis separation of peptides and ESI-QTOF-MS identification.     

Photodecomposition profiles of beta-bond cleavage of phenylphenacyl derivatives in the higher triplet excited states during stepwise two-color two-laser flash photolysis

Photochemical properties of p-phenylphenacyl derivatives (PP-X) having C-halide, C-S, and C-O bonds in the lowest (T 1) and higher (T n ) triplet excited states were investigated in solution by using single-color and stepwise two-color two-laser flash photolysis techniques. PP-Xs (X = Br, SH, and SPh) undergo beta-bond dissociation in the lowest singlet excited states (S 1) while the C-X bonds of other PP-Xs are stable upon 266-nm laser photolysis. The T 1(pi,pi*) states of PP-X were efficiently produced during 355-nm laser photolysis of benzophenone as a triplet sensitizer. Triplet PP-Xs deactivate to the ground state without photochemical reactions. Upon 430-nm laser photolysis of the T 1 states of PP-X (X = Br, Cl, SH, SPh, OH, OMe, and OPh), decomposition of PP-X in the T n states was found. On the basis of the changes in the transient absorption, quantum yields (Phi dec) of the decomposition of PP-X in the T n states were determined, while bond dissociation energies (BDE) of the C-X bonds were calculated by computations. According to the relationship between the Phi dec and BDE values, it was shown that the decomposition of PP-X in the T n state is due to beta-cleavage of the corresponding C-X bond, and that the state energy of the reactive T n for the C-O bond cleavage differs from that for the C-halide and C-S bond cleavage. The reaction profiles of the C-X bond cleavage of PP-X in the T n states were discussed.     

d-glucose Enhanced 5-Aminolevulinic Acid Production in Recombinant Escherichia coli Culture

In this study, we introduced a new strategy, feeding d-glucose, to overproduce extracellular 5-aminolevulinic acid (ALA) in the recombinant Escherichia coli. We investigated that the d-glucose concentration is dependent on extracellular ALA production. The results indicated that increasing d-glucose concentration in bacteria culture enhanced final cell density and ALA yield and simultaneously decreased the activities of ALA synthase (ALAS) and ALA dehydratase (ALAD); then, the inhibitory effect of d-glucose on ALAS activity was relieved with the metabolism of d-glucose. when 4.0 g/L d-glucose was added at late exponential phase; 1.46 g/L ALA was achieved in shaking culture, which is 47% or 109% higher than the ALA yields with 30 mM levulinic acid of ALAD inhibitor or no inhibitor. In jar fermenter, final extracellular ALA concentration reached 3.1 g/L by feeding with d-glucose.     

In-site mineralization of amorphous calcium carbonate particles: A facile and efficient approach to fabricate poly(l-lactic acid) based hybrids

The aim of this investigation is to obtain a polymer-based hybrid material with biodegradability, biocompatibility, and good mechanical properties and this object was realized via. in-situ introduction of the unmodified calcium carbonate (CaCO₃) into a poly(l-lactic acid) (PLLA) matrix. As verified by the measurements from scanning electron microscopy (SEM), optical microscopy, dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA), the hybrid films which possesses a uniform dispersion of calcium carbonate CaCO₃ in nano-meter scale, mechanically robustness and thermal stability could be fabricated by a mineralization-alike process. For example, the storage modulus increases from 441 MPa of neat PLLA to 1034 MPa of hybrid film containing 2% (w/w) CaCO₃. In addition, the hybrid films display a significant improvement in its UV-exposure resistance.     

甲醛与乙醛,甲醚,硝基甲烷相互作用的从头算研究

用6-31G、全构型优化,研究了甲醛与乙醛、甲醚、硝基甲烷的相互作用。结果表明所有超分子稳定构型都包含2个C—H—O氢键的平面环状结构。H—O距离为0.228～0.264 nm,作用能为—19～—24 kJ/mol,与二聚水的作用能接近。稳定性主要取决于甲基上取代基Y吸电子能力以及环状结构中氢键张力。STO-3G不很适用于研究这类分子的相互作用。     

Addition of benzylic and allylic organozinc and Grignard reagents to resin-bound imines to provide alpha-branched secondary amines bearing a wide variety of functional groups. Utility in the synthesis of beta-3 adrenergic receptor agonists

Benzylic and allylic organozinc and Grignard reagents have been added to resin-bound imines to provide alpha-branched secondary amines. Many functional groups, including electrophilic groups, were compatible with this methodology. Three modules--a resin-bound primary amine, an aromatic aldehyde, and the organometallic--were independently varied to produce a combinatorial library of alpha-branched secondary amines designed as beta-3 adrenergic receptor agonists.     

One-electron oxidation of alcohols by the 1,3,5-trimethoxybenzene radical cation in the excited state during two-color two-laser flash photolysis

One-electron oxidation of alcohols such as methanol, ethanol, and 2-propanol by 1,3,5-trimethoxybenzene radical cation (TMB*+) in the excited state (TMB*+*) was observed during the two-color two-laser flash photolysis. TMB*+ was formed by the photoinduced bimolecular electron-transfer reaction from TMB to 2,3,5,6-tetrachlorobenzoquinone (TCQ) in the triplet excited-state during the first 355-nm laser flash photolysis. Then, TMB*+* was generated from the selective excitation of TMB*+ during the second 532 nm laser flash photolysis. Hole transfer rate constants from TMB*+* to methanol, ethanol, and 2-propanol were calculated to be (5.2 +/- 0.5) x 10(10), (1.4 +/- 0.3) x 10(11), and (3.2 +/- 0.6) x 10(11) M-1 s-1, respectively. The order of the hole transfer rate constants is consistent with oxidation potentials of alcohol. Formation of TCQH radical (TCQH*) with a characteristic absorption peak at 435 nm was observed in the microsecond time scale, suggesting that deprotonation of the alcohol radical cation occurs after the hole transfer and that TCQ radical anion (TCQ*-), generated together with TMB*+ by the photoinduced electron-transfer reaction, reacts with H+ to give TCQH*.     

Highly efficient enrichment of phosphopeptides by magnetic nanoparticles coated with zirconium phosphonate for phosphoproteome analysis

The location of phosphorylation plays a vital role for the elucidation of biological processes. The challenge of low stoichiometry of phosphoproteins and signal suppression of phosphopeptides by nonphosphopeptides in mass spectrometry (MS) analysis makes the selective enrichment of phosphopeptides prior to MS analysis necessary. Besides the immobilized metal affinity chromatography (IMAC) method, some affinity methods based on nanoparticles displayed a higher enrichment efficiency for phosphopeptides such as Fe(3)O(4)/TiO2 and Fe(3)O(4)/ZrO(2) nanoparticles. To further improve the selectivity and compatibility of the affinity methods, a novel strategy based on magnetic nanoparticles coated with zirconium phosphonate for the enrichment of phosphopeptides has been developed in this study. Under optimized experimental conditions, 1 x 10(-9) M phosphopeptides in 50 microL tryptic digest of beta-casein could be enriched and identified successfully. Reliable results were also obtained for 1 x 10(-8) M phosphopeptides in 50 microL tryptic digest of beta-casein in the presence of nonphosphopeptides from a tryptic digest of bovine serum albumin (BSA) over 20 times in concentration. The performance of nanoparticles for use in a real sample was further demonstrated by employing the strong cation-exchange chromatography (SCX) fraction of a tryptic digest of a protein extract from Chang liver cells as a model sample. Experimental results show that the nanoparticles can be easily and effectively used for enrichment of phosphopeptides in low concentration. Most importantly, our approach is more compatible with commonly used SCX strategies than Fe(3+)-IMAC. The proposed method thus has great potential for future studies of large-scale phosphoproteomes.